AEG OKO FAVORIT 40660 i 사용자 지침 - 페이지 11

{카테고리_이름} AEG OKO FAVORIT 40660 i에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG OKO FAVORIT 40660 i 40 페이지. Aeg dishwasher
AEG OKO FAVORIT 40660 i에 대해서도 마찬가지입니다: 사용자 정보 (44 페이지), 사용자 지침 (44 페이지), 사용자 지침 (44 페이지), 사용자 지침 (48 페이지)

페이지 인쇄

It is only possible to adjust the water hardness setting when a pro-

gramme is not running. If you have inadvertently started a programme

(an LED indicator is constantly illuminated), then the programme must

be cancelled by pressing the appropriate button.

1. The appliance must be switched off.

2. Press the water-softener and function buttons simultaneously and

keep them pressed.

3. In addition press the ON/OFF button.

4. The LED indicator for the water-softener button flashes.

5. Press the water-softener button again.

– The LED indicator for the water-softener button will be continuously

illuminated for an initial 5 seconds and then begin to flash.

– The number of flashes corresponds to the hardness setting.

– The sequence of flashes is repeated several times after a 5 second

pause.

6. Each time you press the water-softener button the hardness setting

will go up by 1.

(Exception: Hardness setting 1 follows hardness setting 5).

– If the hardness setting is changed, the LED indicator for the water-

softener button will confirm the change by remaining illuminated

continuously for 5 seconds and then flashing again.

– The number of flashes corresponds to the new hardness setting.

– The sequence of flashes is repeated several times after a 5 second

pause.

7. Once the hardness setting is correct, press the ON/OFF button.

The hardness setting is then saved.

Operating Instructions