AEG OKO FAVORIT 4270 i 사용자 지침 - 페이지 10

{카테고리_이름} AEG OKO FAVORIT 4270 i에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG OKO FAVORIT 4270 i 44 페이지. Aeg dishwasher
AEG OKO FAVORIT 4270 i에 대해서도 마찬가지입니다: 사용자 지침 (40 페이지)

페이지 인쇄
AEG OKO FAVORIT 4270 i 사용자 지침
Operating instructions

Adjust the water softener

To avoid the scale deposits on the dishes and in the dishwasher, the
dishes must be washed with soft, i.e. low lime content, water. The dish-
washer therefore has a built-in water softener, in which tap water from
a hardness of 4 °d (German degree) is softened with the aid of special
salt.
You water supplier will be able to inform you on the hardness and
3
hardness range of the water in your area.
Adjust the water softener to the setting that corresponds to the hard-
0
ness of the water in your area. The water softener can be adjusted in
10 steps.
1
in °d
)
41-50
35-40
31-34
27-30
23-26
19-22
15-18
11-14
4-10
under 4
1)(°d) German degree, measure of the hardness of water
2)(mmol/l) millimol per litre, international unit for the hardness of water
*factory setting
0
1. The dishwasher must be switched off.
2. Press the function and water softener buttons simultaneously and keep
them pressed.
3. In addition press the ON/OFF switch.
The LED indicators for the function and water softener buttons flash.
4. Press the softener button again.
The water softener button indicator starts to flash.
– The number of flashes corresponds to the hardness setting. (Excep-
tion: hardness setting 0 is indicated by 10 flashes).
– The sequence of flashes is repeated after a 5 second pause.
10
Water Hardness
2
in mmol/l
) Range
7.3-9.0
6.3-7.2
5.5-6.2
IV
4.8-5.4
4.1-4.7
3.3-4.0
III
2.6-3.2
1.9-2.5
II
0.7-1.8
I/II
under 0.7
Adjust
to Hardness Setting
9
8
7
6
5
4
3*
2
1
0
I
no salt necessary
Number of
Flashes
9
8
7
6
5
4
3
2
1
10