AEG OKO FAVORIT 50750 사용자 정보 - 페이지 12

{카테고리_이름} AEG OKO FAVORIT 50750에 대한 사용자 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG OKO FAVORIT 50750 40 페이지. Aeg dishwasher
AEG OKO FAVORIT 50750에 대해서도 마찬가지입니다: 사용자 지침 (40 페이지)

페이지 인쇄

Setting the Amount of Rinse Aid Required

Only change the amount dispensed, if smears, milky spots (reduce the

amount) or dried on water spots (increase the amount) can be seen on

glasses and dishes. (See section "If dishwashing results are not satisfac-

tory".) The dosage can be set from 1-6. The dosage is pre-set to "4" in

the factory.

1. Open the dishwasher door.

2. Press the release button on the rinse

aid compartment.

3. Open the cover.

4. Set the dosage level.

5. Press the lid shut until it clicks into

place.

6. If rinse aid has leaked out, wipe it

away with a cloth.

Activating/Deactivating the Rinse Aid dispenser

If the 3in1 function is selected, you do not need to deactivate the rinse

aid dispenser.

1. Press the ON/OFF button.

If indicators for the programme buttons are lit, a dishwashing cycle is

activated. The cycle must be deactivated:

Press function buttons 2 and 3 simultaneously for approx. 2 seconds.

All additional wash programme button indicators will go out.

2. Press function buttons 2 and 3 simultaneously and keep them pressed.

The LED indicators for function buttons 1 to 4 will flash.

3. Press function button 2 .

The LED indicator for function button 2 will flash.

The indicator for the end of the dishwashing cycle will display the cur-

rent setting:

Indicator for the end of the cycle is lit:

Indicator for the end of the cycle is not lit: Rinse aid dispenser deactivated

4. Pressing function button 2 activates and deactivates the rinse aid dis-

pensing function.

Rinse aid dispenser activated

(factory setting)