AEG OKO FAVORIT 80850 i 사용자 지침 - 페이지 39

{카테고리_이름} AEG OKO FAVORIT 80850 i에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG OKO FAVORIT 80850 i 48 페이지. Electrolux user information dishwasher ko_favorit 80850
AEG OKO FAVORIT 80850 i에 대해서도 마찬가지입니다: 사용자 지침 (44 페이지), 사용자 지침 (48 페이지)

페이지 인쇄

• If the dishwasher is installed under-

neath a kitchen work surface, the

original work surface of the dish-

washer is to be removed as follows:

– Unscrew the screws (1) from the

elbows on the back side.

– Slide the work surface approx.

1cm to the rear (2) , lift at the

front (3) and remove.

– Press the work surface retaining

brackets at the position shown in

the diagram (4) and remove the

bracket at an angle to the rear

(5).

If the dishwasher is later used as a free-standing appliance, the original

work surface must be re-mounted.

The plinth on free-standing appliances is not adjustable.

• Free-standing appliances can be

fitted with a décor panel to match

the facings of other kitchen equip-

ment. The décor panels must be

obtained from the kitchen manu-

facturer. A décor frame is necessary

for installation, and can be

obtained as an accessory from the

dealer if not included in the scope

of delivery.

• Decor panel dimensions:

– Height 590 mm

– Width 581 mm

– Clamp thickness: max. 4 mm

• To ensure that thin decor panels do not flex or distort, attach them to

the door of the appliance using double sided adhesive tape.

Installation and Connection Instructions