AEG OKO_FAVORIT 60800 사용자 지침 - 페이지 39

{카테고리_이름} AEG OKO_FAVORIT 60800에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG OKO_FAVORIT 60800 44 페이지. Aeg dishwasher
AEG OKO_FAVORIT 60800에 대해서도 마찬가지입니다: 사용자 지침 (44 페이지)

페이지 인쇄

Electrical Connection

Any electrical work required to install this appliance should be car-

ried out by a qualified electrician or competent person.

WARNING - This appliance must be earthed.

The manufacturer declines any responsibility should these safety

measures not be observed.

Before switching on make sure the electricity supply voltage is the

same as that indicated on the appliance rating plate.

To isolate the dishwasher from the mains, remove the mains plug.

Important: The plug must still be accessible after the appliance has

been installed.

Changing a fuse

The appliance is supplied with a 13amp plug fitted. In the event of hav-

ing to change the fuse in the plug supplied, a 13amp ASTA approved

(BS 1363A) fuse must be used.

Should the plug need to be

replaced for any reason, proceed as

described below.

The wires on the mains lead are

coloured in accordance with the

following code.

Green and Yellow : Earth

Blue

Brown

• The wire coloured green and yellow must be connected to the termi-

nal marked with the letter "E" or by the earth symbol

green and yellow.

• The wire coloured blue must be connected to the terminal "N" or col-

oured black.

• The wire coloured brown must be connected to the terminal marked

"L" or coloured red.

• Upon completion there must be no cut, or stray strands of wire

present and the cord clamp must be secure over the outer sheath.

WARNING! A cut off plug inserted into a 13 amp socket is a seri-

ous safety (shock) hazard. Ensure that, if it is necessary to cut off

the plug, it is disposed of safely and not retained.

Installation and Connection Instructions

: Neutral

: Live

Green

& Yellow

Blue

Cord Clamp

Brown

or coloured