AEG OKO_FAVORIT 60800 사용자 지침 - 페이지 10
{카테고리_이름} AEG OKO_FAVORIT 60800에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG OKO_FAVORIT 60800 44 페이지. Aeg dishwasher
AEG OKO_FAVORIT 60800에 대해서도 마찬가지입니다: 사용자 지침 (44 페이지)
Operating Instructions
Adjust the water softener
To avoid the scale deposits on the dishes and in the dishwasher, the
dishes must be washed with soft, i.e. low lime content, water. The dish-
washer therefore has a built-in water softener, in which tap water from
a hardness of 4 °d (German degree) is softened with the aid of special
salt.
You water supplier will be able to inform you on the hardness and
3
hardness range of the water in your area.
Adjust the water softener to the setting given in the table that corre-
0
sponds to the hardness of the water in your area. The water softener
can be adjusted in 10 steps.
1
in °d
)
41-50
35-40
31-34
27-30
23-26
19-22
15-18
11-14
4-10
under 4
1)(°d) German degree, measure of the hardness of water
2)(mmol/l) millimol per litre, international unit for the hardness of water
*factory setting
0
1. The dishwasher must be switched off.
2. Press the function and water softener buttons simultaneously and keep
them pressed
3. In addition press the ON/OFF switch A.
The LED indicators for the function and water softener buttons flash.
4. Press the softener button again.
The multi-display indicates the hardness setting.
5. Pressing the water softener button increases the hardness setting by 1.
(Exception: hardness setting 0 follows hardness setting 9).
10
Water Hardness
2
in mmol/l
) Range
7.3-9.0
6.3-7.2
5.5-6.2
IV
4.8-5.4
4.1-4.7
3.3-4.0
III
2.6-3.2
1.9-2.5
II
0.7-1.8
I/II
under 0.7
Adjust
to Hardness Setting
9
8
7
6
5
4
3*
2
1
0
I
no salt necessary
Indication on the
Multi-Display
H 9
H 8
H 7
H 6
H 5
H 4
H 3
H 2
H 1
H 0