AEG OKO_FAVORIT 64800 사용 설명서 - 페이지 25

{카테고리_이름} AEG OKO_FAVORIT 64800에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG OKO_FAVORIT 64800 42 페이지. Aeg dishwasher öko favorit 64800
AEG OKO_FAVORIT 64800에 대해서도 마찬가지입니다: 사용 설명서 (48 페이지)

페이지 인쇄

8a. Set and start the programme without "DELAY START"

Select the wash programme by simply pressing one of the programme push

buttons, the display will show the running time of the programme in minutes

and the indicator lights of the phases corresponding to the programme will

illuminate.

If necessary select the "SMALL LOAD" by pressing the corresponding push

button (in this case the running time of the programme will be adjusted).

With the selection of the programmes "QUICK 50°" and "PREWASH" this option

is not available.

If the setting of the programme has been made with the door opened:

close the door and the programme will start automatically after 5 seconds.

While the door remains open you still have the chance to modify the setting

made.

If the setting of the programme has been made with the door closed:

the programme will start automatically after 5 seconds from the last pressure of

a push button.

The starting of the programme will be confirmed by an audible signal, the

indicator lights of the phases turn off except for the light of the phase under

way. The displayed time will start to decrease from minute to minute.

8b. Set and start the programme with "DELAY START"

Select the wash programme by simply pressing one of the programme push

buttons, the display will show the running time of the programme in minutes

and the indicator lights of the phases corresponding to the programme will

illuminate.

If necessary select the "SMALL LOAD" by pressing the corresponding push

button (in this case the running time of the programme will be adjusted).

With the selection of the programmes "QUICK 50°" and "PREWASH" this option

is not available.

Press the "DELAY START" push button, in the display appears h1. Select the time

by repeatedly pressing the "DELAY START" push button until the required

number of hours appear in the display. You can delay the start of a programme

up to a maximum of 12 hours (h12).

To cancel the setting of the delay start press the push button until the running

time of the selected programme reappears in the display.

If the setting of the programme has been made with the door opened:

close the door and the dishwasher starts the countdown automatically after 5

seconds. The number of hours to go before the programme starts appears in the

display and decreases from hour to hour. The letter h flashing in the display

indicates that the delay start is active.