AEG VVW6020A 사용 설명서 - 페이지 37

{카테고리_이름} AEG VVW6020A에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG VVW6020A 48 페이지. 12 place settings

setting the dishwasher

• Switch the dishwasher on by pressing the On/off button (1).

• Select the desired program by pressing the corresponding program button (4).

• Press the Start/Pause-knop (5) to start the program. The indicator light of the selected program will blink.

When the machine has finished a buzzer will sound for 8 seconds. The indicator light of the used program stops blinking.

• Switch the dishwasher off with the On/off button (1).

NOTE!

You can slightly open the door and wait a few minutes before unloading the dishwasher. The dishes and

cutlery will still be very hot and may break as a result of the heat. Moreover, the dishes dry better when allowed

to stand for a few minutes.

If you would like to change a program while a washing cycle is already running.

• Press during 3 seconds the Start/Pause button (5). Select another program and switch the dishwasher on again.

TIP: forgot to add a dish?

1. Press the Start/Pause-button (5) to pause the program.

2. Carefully open the door a little.

3. Wait until the spray arms stop turning and than open the door completely.

4. Place the forgotten dishes in the dishwasher.

5. Close the door.

6. Press the Start/Pause-button (5) to restart the program. The program will resume after 10 seconds.

English

•