AEG 111K-D 사용 설명서 - 페이지 14

{카테고리_이름} AEG 111K-D에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 111K-D 20 페이지. Electric hob

Important safety requirements

This hob must be installed in accordance with the IEE Wiring

Regulations (Current Edition).

Detailed recommendations are contained in the following British

Standards Codes Of Practice: B.S. 6172/ B.S. 5440, Par. 2 and B.S. 6891

Current Editions.

This hob has been registered as a "Class Y" appliance according to Fire

Risk Regulations. Minimum distances detailed below must be observed.

The hob may be located in a kitchen, a kitchen/diner or bed sitting

room, but not in a bathroom or shower room.

Before making the cut out in the worktop ensure that there is a

minimum distance of 55 mm. between the rear edge of the hob and

the wall. A minimum distance of 100 mm. must be left between the

side edges of the hob and any adjacent cabinets or walls.

The minimum distance combustible material can be fitted above the

hob in line with the edges of the hob is 420 mm. If it is fitted below

420 mm. a space of 50 mm. must be allowed from the edges of the

hob. The minimum distance combustible material can be fitted directly

above the hob is 700 mm.

CLEARANCES REQUIRED

WHEN FITTING THE HOB

WITHOUT A COOKER HOOD ABOVE

700 mm

420 mm

FO 0812

WITH A COOKER HOOD ABOVE

700 mm

650 mm

420 mm

FO 0813

CLEARANCES REQUIRED

WHEN FITTING THE HOB

420 mm