AEG 21602 G 운영 및 설치 매뉴얼 - 페이지 16

{카테고리_이름} AEG 21602 G에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 21602 G 26 페이지. Gas hob
AEG 21602 G에 대해서도 마찬가지입니다: 작동 및 설치 지침 (27 페이지)

On the end of the shaft, which includes the GJ 1/2" threaded elbow,

adjustment is fixed so that the washer is fitted between the components as

shown in the diagram. Screw the parts together without using excessive

force.

Gas Connection

Connection to the gas supply should be with either rigid or semi-rigid pipe,

i.e. steel or copper.

The connection should be suitable for connecting to RC 1/2 (1/2 BSP male

thread).

When the final connection has been made, it is essential that a thorough leak

test is carried out on the hob and installation.

Ensure that the main connection pipe does not exert any strain on the hob.

It is important to install the elbow correctly, with the shoulder on the

end of the thread, fitted to the hob connecting pipe.

Failure to ensure the correct assembly will cause leakage of gas.

FO 0264

A) End of shaft with nut

B) Washer

C) Elbow

FO 0814