AEG 231GR-M 지침서 - 페이지 10

{카테고리_이름} AEG 231GR-M에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 231GR-M 16 페이지. Ceramic griddle
AEG 231GR-M에 대해서도 마찬가지입니다: 지침서 (16 페이지), 지침서 (11 페이지), 지침서 (21 페이지)

페이지 인쇄

Caution: In order to avoid a hazard this

appliance must be installed according to

these instructions for installation

The appliance unit can be mounted in

any type of kitchen with a work top

whose thickness is between 28 mm and

40 mm.

Clearance

The distance between the top side of the

work top and the carpentry underneath

must be at least 47 mm.

Fixing

Screw the fixing brackets out to such an

extent that they can be turned in under

the work top. Tighten the brackets on to

the work top with an ordinary

screwdriver.

Cut-out measurements

One rectangular hole is sawn out for the

appliance combination chosen.

The depth of the cut-out for any unit is:

490 mm

Length of hole = sum of all units`

externally measured length, less 20 mm.

Mounting of Reinforcement

Beams

A reinforcement Beam, with supporting

flanges at each end, is included with

each two-burner unit. For unit

combinations, a reinforcement beam

must be used between each unit.

Montage

Minimum distance

to wall:

150 mm

Reinforcement

beams

Minimum distance

to wall (non-

flammable material):

150 mm