AEG 231GR-M 지침서 - 페이지 11
{카테고리_이름} AEG 231GR-M에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 231GR-M 21 페이지. Ceramic griddle
AEG 231GR-M에 대해서도 마찬가지입니다: 지침서 (16 페이지), 지침서 (16 페이지), 지침서 (11 페이지)
페이지 인쇄
It is not necessary to attach the
reinforcement beam to the work top
surface, as it is held in place by a
specially designed moulding, which is
incorporated in the hob units flanges.
The units externally measured
length
145 mm:
Cooker hood
290 mm:
Two-zone ceramic-top electric hob
Two-burner gas hob
Grill
Fryer
Wok
580 mm:
Four-zone ceramic-top electric hob
Four-burner gas hob
725 mm:
Four-zone ceramic-top electric hob
Installation of a single unit
When mounting a single unit, be it a
half-or full size unit, in a
worktopsurface which is thicker than
30 mm, it is necessary to make a
special notch in both sides of the cut-
out hole, as shown in the adjacent
drawing.
The purpose of these notches is to
create space for the electrical cables.