Brother MFC-J5730DW 참조 매뉴얼 - 페이지 27

{카테고리_이름} Brother MFC-J5730DW에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J5730DW 32 페이지.
Brother MFC-J5730DW에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지)

Error Message

Unable to Scan XX Disconnect the machine from the power for several minutes, and then

Unusable Device

Disconnect device

from front

connector & turn

machine off &

then on

Unusable Device

Please disconnect

USB device.

Wrong Ink

Cartridge

Wrong Ink Colour

Wrong Tray

Settings

Related Information

• Telephone Line Interference/VoIP on page 15

• Supply Specifications on page 29

Action

reconnect it.

If you cannot print received faxes, transfer them to another fax

machine or to your computer.

For more information, see the Online User's Guide: Transfer Your

Faxes or Fax Journal Report.

A broken device is connected to the USB direct interface.

Unplug the device from the USB direct interface, then press

turn the machine off and then on again.

A USB device or USB flash drive that is not supported has been

connected to the USB direct interface.

Unplug the device from the USB direct interface. Turn the machine off

and then on again.

The ink cartridge model number is not compatible with your machine.

Verify whether the cartridge model number will work with your

machine.

See Related Information: Supply Specifications at the end of this

section.

Check which ink cartridges are not matched by colour to their ink

cartridge positions and move them to their correct positions.

Follow the instructions on the Touchscreen and try to print again.

Configure the paper size setting for the tray according to the LCD

instructions.