Brother MFC-J5845DW 참조 매뉴얼 - 페이지 28

{카테고리_이름} Brother MFC-J5845DW에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J5845DW 32 페이지. Brief explanations for routine operations
Brother MFC-J5845DW에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지), 제품 안전 매뉴얼 (25 페이지), 제품 안전 매뉴얼 (25 페이지), 빠른 설정 매뉴얼 (2 페이지), 빠른 설정 매뉴얼 (2 페이지)

페이지 인쇄
Brother MFC-J5845DW 참조 매뉴얼
Error Message
Unable to Clean
XX
Unable to
Initialize XX
Unable to Print
XX
Unable to Scan XX Disconnect the machine from the power for several minutes, and then
Unusable Device
Disconnect device
from front
connector & turn
machine off &
then on
Unusable Device
Please disconnect
USB device.
Wrong Ink
Cartridge
Wrong Ink Color
Wrong Tray
Settings
Action
A foreign object, such as a paper clip or a piece of ripped paper, is in
the machine.
Open the scanner cover and remove any foreign objects and paper
scraps from inside the machine. If the error message continues,
disconnect the machine from the power for several minutes, and then
reconnect it.
You can try additional paper jam clear operations.
For more detailed information, see the Online User's Guide: Remove
Paper Scraps.
If you cannot print received faxes, transfer them to another fax
machine or to your computer.
For more detailed information, see the Online User's Guide: Transfer
Your Faxes or Fax Journal Report.
reconnect it.
If you cannot print received faxes, transfer them to another fax
machine or to your computer.
For more detailed information, see the Online User's Guide: Transfer
Your Faxes or Fax Journal Report.
A broken device is connected to the USB direct interface.
Unplug the device from the USB direct interface, then press
turn the machine off and then on again.
A USB device or USB flash drive that is not supported has been
connected to the USB direct interface.
Unplug the device from the USB direct interface. Turn the machine off
and then on again.
The ink cartridge model number is not compatible with your machine.
Verify whether the cartridge model number will work with your
machine.
See Related Information: Supply Specifications at the end of this
section.
Check which ink cartridges are not matched by color to their ink
cartridge positions and move them to their correct positions.
Follow the instructions on the touchscreen and try to print again.
Configure the paper size setting for the tray according to the LCD
instructions.
to
26