AEG 30" HK854080XB 사용자 설명서 - 페이지 13

{카테고리_이름} AEG 30" HK854080XB에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 30" HK854080XB 40 페이지. 30” electric cooktop
AEG 30" HK854080XB에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지), 매뉴얼 (7 페이지), 사용자 설명서 (20 페이지)

페이지 인쇄

7. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

7.1 What to do if...

Problem

You cannot activate or oper-

ate the hob.

An acoustic signal sounds

and the hob deactivates.

An acoustic signal sounds

when the hob is deactivated.

The hob deactivates.

Residual heat indicator does

not come on.

Automatic Heat Up function

does not operate.

You cannot activate the out-

er ring.

Possible cause

The hob is not connected to

an electrical supply or it is

connected incorrectly.

The fuse is blown.

You touched 2 or more sen-

sor fields at the same time.

STOP+GO function oper-

ates.

There is water or fat stains

on the control panel.

You put something on one

or more sensor fields.

You put something on the

sensor field

The zone is not hot because

it operated only for a short

time.

The zone is hot.

The highest heat setting is

set.

ENGLISH

Remedy

Check if the hob is correctly

connected to the electrical

supply. Refer to the connec-

tion diagram.

Make sure that the fuse is

the cause of the malfunction.

If the fuse is blown again

and again, contact a quali-

fied electrician.

Activate the hob again and

set the heat setting in less

than 10 seconds.

Touch only one sensor field.

Refer to "Daily use" chapter.

Clean the control panel.

Remove the object from the

sensor fields.

Remove the object from the

sensor field.

If the zone operated suffi-

ciently long to be hot, speak

to an Authorised Service

Centre.

Let the zone become suffi-

ciently cool.

The highest heat setting has

the same power as the func-

tion.

Activate the inner ring first.