AEG 3000 IKB64301XB 사용자 설명서 - 페이지 11
{카테고리_이름} AEG 3000 IKB64301XB에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 3000 IKB64301XB 20 페이지.
페이지 인쇄
until the correct heat setting comes on.
After 3 seconds
To deactivate the function: touch
5.5 PowerBoost
This function makes more power available to
the induction cooking zones. The function
can be activated for the induction cooking
zone only for a limited period of time. After
this time the induction cooking zone
automatically sets back to the highest heat
setting.
Refer to "Technical data"
chapter.
To activate the function for a cooking
zone: touch
.
To deactivate the function: touch
.
5.6 Timer
• Count Down Timer
You can use this function to set the length of
a single cooking session.
First set the heat setting for the cooking
zone, then set the function.
To set the cooking zone: touch
repeatedly until the indicator of a cooking
zone appears.
To activate the function or change the
time: touch
or
time (00 - 99 minutes). When the indicator of
the cooking zone starts to flash, the time
counts down.
To see the remaining time: touch
the cooking zone. The indicator of the
cooking zone starts to flash. The display
shows the remaining time.
To deactivate the function: touch
the cooking zone and then touch
remaining time counts down to 00. The
indicator of the cooking zone disappears.
comes on.
.
comes on.
of the timer to set the
to set
to set
. The
When the countdown ends, an
acoustic signal sounds and 00
flashes. The cooking zone
deactivates.
To stop the sound: touch
• Minute Minder
You can use this function when the hob is
activated and the cooking zones do not
operate. The heat setting display shows
To activate the function: touch
touch
When the time finishes, an acoustic signal
sounds and 00 flashes.
To stop the sound: touch
To deactivate the function: touch
then touch
or
down to 00.
The function has no effect on the
operation of the cooking zones.
5.7 Pause
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, all other
symbols on the control panels are locked.
The function does not stop the timer
functions.
Press
comes on. The heat setting is lowered to
1.
To deactivate the function: press
previous heat setting comes on.
5.8 Lock
You can lock the control panel while cooking
zones operate. It prevents an accidental
change of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays on.
or
of the timer to set the time.
. The remaining time counts
to activate the function.
.
.
and then
.
and
. The
.
ENGLISH
11