Brother MFC-J615 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} Brother MFC-J615에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J615 37 페이지.

Gently push the ink cartridge until it clicks. After

all the ink cartridges are installed close the ink

cartridge cover.

Note

The machine will prepare the ink tube system for

printing. This process will take approximately four

minutes. Do not turn off the machine.

Check the print quality

When the preparation process has finished, the

LCD shows Set Paper and Press Start.

Press Colour Start.

Check the quality of the four colour blocks a

on the sheet. (black/yellow/cyan/magenta)

If all lines are clear and visible, press 1 (Yes)

on the dial pad to finish the quality check and

go to step 6.

If you can see missing short lines, press 2 (No)

on the dial pad and follow the steps on the

LCD.

Poor

1 1