Brother MFC-J6510DW 빠른 설정 매뉴얼 - 페이지 11

{카테고리_이름} Brother MFC-J6510DW에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J6510DW 41 페이지. Quick setup guide - spanish
Brother MFC-J6510DW에 대해서도 마찬가지입니다: 사양 (2 페이지), 빠른 설정 매뉴얼 (39 페이지), 사용 설명서 (17 페이지), (영어) 빠른 구성 가이드 (41 페이지)

페이지 인쇄
Brother MFC-J6510DW 빠른 설정 매뉴얼
Note
(USA only)
The Telephone Consumer Protection Act of 1991
makes it unlawful for any person to use a
computer or electronic device to send any
message via a telephone fax machine unless
such messages clearly contain, in a margin at the
top or bottom of each transmitted page, or on the
first page of the transmission, the date and time it
is sent and an identification of the business or
other entity or other individual sending the
message and the telephone number of the
sending machines or such business, other entity
or individual.
11
Fax Transmission Report
Your Brother machine is equipped with a
Transmission Verification Report that can be used as
confirmation that you sent a fax. This report lists the
name or fax number of the receiving party, the date,
time, and duration of the transmission, the number of
pages transmitted, and whether or not the
transmission was successful. If you want to use the
Fax Transmission Report feature, see Transmission
Verification Report in chapter 4 of the Basic User's
Guide.

Set Tone or Pulse dialing

12
mode
(Canada only)
Your machine comes set for Tone dialing service. If
you have Pulse dialing service (rotary), you need to
change the dialing mode.
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Tone/Pulse.
d
Press d or c to choose Pulse (or Tone).
Press OK.
e
Press Stop/Exit.
13
Set the telephone line
compatibility
If you are connecting the machine to a VoIP service
(over the Internet) you need to change the
compatibility setting.
Note
If you are using an analog telephone line you can
skip this step.
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Compatibility.
d
Press d or c key to choose
Basic(for VoIP).
Press OK.
e
Press Stop/Exit.
14
Automatic Daylight
Savings Time
You can set the machine to change automatically for
daylight savings time. It will reset itself forward one
hour in the spring and backward one hour in the fall.
a
Press Menu.
b
Press a or b to choose General Setup.
Press OK.
c
Press a or b to choose Auto Daylight.
d
Press d or c to choose On (or Off).
Press OK.
e
Press Stop/Exit.
11