Brother MFC-J6510DW 빠른 설정 매뉴얼 - 페이지 23

{카테고리_이름} Brother MFC-J6510DW에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J6510DW 41 페이지. Quick setup guide - spanish
Brother MFC-J6510DW에 대해서도 마찬가지입니다: 사양 (2 페이지), 빠른 설정 매뉴얼 (39 페이지), 사용 설명서 (17 페이지), (영어) 빠른 구성 가이드 (41 페이지)

페이지 인쇄
Brother MFC-J6510DW 빠른 설정 매뉴얼
Wired Network
For wired network interface users
18
Before you install
a
Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
Note
• For the latest drivers and information on the
Mac OS X you are using, visit
http://solutions.brother.com/.
• For Mac OS X 10.4.0 to 10.4.10 users, upgrade
to Mac OS X 10.4.11 - 10.6.x.
• If you have previously set up your machine for
a wireless network and then want to set it up on
a wired network, you should check that the
machine's Network I/F is set to
Wired LAN. The wireless network interface
will become inactive with this setting.
On your machine, press Menu.
Press a or b to choose Network and press
OK.
Press a or b to choose Network I/F and
press OK.
Press a or b to choose Wired LAN and press
OK.
Press Stop/Exit.
(Mac OS X 10.4.11, 10.5.x, 10.6.x)
19
Connect the network
cable
a
Lift the scanner cover into the open position.
b
You will find the LAN socket marked with a
symbol inside the machine on the left as shown
below. Remove the protective cap and connect
the network cable to the LAN socket.
LAN
Macintosh
USB
23