Brother MFC-J6510DW 빠른 설정 매뉴얼 - 페이지 21

{카테고리_이름} Brother MFC-J6510DW에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J6510DW 39 페이지. Quick setup guide - spanish
Brother MFC-J6510DW에 대해서도 마찬가지입니다: 사양 (2 페이지), 빠른 설정 매뉴얼 (41 페이지), 사용 설명서 (17 페이지), (영어) 빠른 구성 가이드 (41 페이지)

페이지 인쇄

Wired Network

For wired network interface users

Before you install

Make sure your machine is connected to the power

and your Macintosh is ON. You must be logged on

with Administrator rights.

Note

• For the latest drivers and information on the

Mac OS X you are using, visit

http://solutions.brother.com/.

• For Mac OS X 10.4.0 to 10.4.10 users, upgrade

to Mac OS X 10.4.11 - 10.6.x.

• If you have previously set up your machine for

a wireless network and then want to set it up on

a wired network, you should check that the

machine's Network I/F is set to

Wired LAN. The wireless network interface

will become inactive with this setting.

On your machine, press Menu.

Press a or b to choose Network and press

OK.

Press a or b to choose Network I/F and

press OK.

Press a or b to choose Wired LAN and press

OK.

Press Stop/Exit.

(Mac OS X 10.4.11, 10.5.x, 10.6.x)

Connect the network

cable

Lift the scanner cover into the open position.

You will find the LAN socket marked with a

symbol inside the machine on the left as shown

below. Remove the protective cap and connect

the network cable to the LAN socket.

LAN

Macintosh

USB