Brother MFC-J6920DW 빠른 설정 매뉴얼 - 페이지 2
{카테고리_이름} Brother MFC-J6920DW에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J6920DW 31 페이지. Brother all in one printer
Brother MFC-J6920DW에 대해서도 마찬가지입니다: 안전 매뉴얼 (21 페이지), 제품 안전 매뉴얼 (20 페이지), 빠른 설정 매뉴얼 (45 페이지), 제품 안전 매뉴얼 (25 페이지), 안전 매뉴얼 (20 페이지)
페이지 인쇄
2
Connect the power cord
and telephone line
WARNING
• The machine must be fitted with an earthed
plug.
• Since the machine is grounded through the
power outlet, you can protect yourself from
potentially hazardous electrical conditions on
the telephone network by keeping the power
cord connected to your machine when you
connect it to a telephone line. Similarly, you
can protect yourself when you want to move
your machine by disconnecting the telephone
line first and then the power cord.
NOTE
DO NOT connect the USB cable yet (if you are
using a USB cable).
a
Connect the power cord.
NOTE
• If you do not plan to use the fax feature on this
machine, go to step 3 on page 3.
• To prolong the life of the print head, provide the
best ink cartridge economy and maintain print
quality, we do not recommend unplugging the
machine frequently and/or leaving the machine
unplugged for extended periods of time. Each
time you plug the machine in, it automatically
cleans the print head, which uses some of your
ink.
We recommend using
machine. Using
the machine, resulting in periodic, but less
frequent, cleaning of the print head.
b
Lift the scanner cover until it locks securely into
the open position.
2
to power down the
allows minimal power to
c
Connect the telephone line cord.
Connect one end of the telephone line cord to
the socket marked LINE on the machine.
Carefully guide the telephone line cord into the
cable channel and out the back of the machine.
Connect the other end to a modular wall
socket.
IMPORTANT
The telephone line cord MUST be connected to
the socket marked LINE on the machine.
d
Gently close the scanner cover using the finger
holds on each side.
CAUTION
Be careful not to pinch your fingers when you
close the scanner cover.
Always use the finger holds provided on each side
of the scanner cover when opening and closing it.