Brother MFC-J6920DW 빠른 설정 매뉴얼 - 페이지 23

{카테고리_이름} Brother MFC-J6920DW에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J6920DW 31 페이지. Brother all in one printer
Brother MFC-J6920DW에 대해서도 마찬가지입니다: 안전 매뉴얼 (21 페이지), 제품 안전 매뉴얼 (20 페이지), 빠른 설정 매뉴얼 (45 페이지), 제품 안전 매뉴얼 (25 페이지), 안전 매뉴얼 (20 페이지)

페이지 인쇄

For Wireless Network Users

Manual setup from the

control panel using the

Setup Wizard

Macintosh and mobile devices)

Press

Press Setup Wizard.

When Switch Network interface to

wireless? is displayed, press Yes to accept.

This will start the wireless setup wizard.

To cancel, press No.

The machine will search for available SSIDs. It

will take several seconds to display a list of

available SSIDs.

If a list of SSIDs is displayed, swipe up or down,

or press a or b to choose the SSID you wrote

down in step 19-b on page 21.

Press OK.

If the wireless access point/router of the

selected SSID supports WPS and the machine

asks to use WPS, go to c.

If the machine asks you to enter a Network

Key, go to d.

Otherwise, go to e.

NOTE

• If the list is blank, check that the wireless

access point/router has power and is

broadcasting the SSID. Move your machine

closer to the wireless access point/router and

try starting from a again.

• If your access point is set to not broadcast the

SSID, you will have to manually add the SSID

name. For details, see the Software and

Network User's Guide.

Press Yes to connect your machine using

WPS. (If you choose No (Manual) to

continue manual configuration, go to d to enter

a Network Key.)

When the Touchscreen instructs you to start

WPS, press the WPS button on your wireless

access point/router, and then press Next to

proceed.

Go to e.

(Windows

NOTE

For mobile device users:

• Connect your mobile device to a wireless access

• Download and install Brother iPrint&Scan

• To download the User's Guide for the application

http://solutions.brother.com/

To install MFL-Pro Suite, continue to

step 21.

For Windows

Page 25

For Macintosh users:

Page 27

Enter the Network Key you wrote down in

step 19-b on page 21 using the Touchscreen.

Press

to cycle between lower case and

upper case. Press

letters, numbers and special characters. (The

characters available may differ depending on

your country.) To move the cursor to the left or

right, press d or c.

(For details, see Entering Text on page 29.)

Press OK when you have entered all the

characters, then press Yes to apply your

settings.

Your machine will now try to connect to your

wireless network. It may take a few minutes.

Press OK.

Wireless setup is now complete.

The Wi-Fi LED

lights up, indicating that the machine's

Network I/F is set to WLAN.

point/router using a Wi-Fi connection.

(Android™/iOS/Windows

mobile device's application download site. You can

also use AirPrint (iOS) with this machine.

you are using (Brother iPrint&Scan/AirPrint), visit

the Brother Solutions Center and click Manuals on

your model's page.

Now go to

users:

Now go to

to cycle between

on the control panel

Phone) from your