AEG 34942G-W 작동 및 설치 지침 - 페이지 26

{카테고리_이름} AEG 34942G-W에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 34942G-W 27 페이지.

It is important to note that this model is designed for use with natural gas

but can be converted for use with butane or propane gas providing the

correct injectors are fitted and the gas rate is adjusted to suit.

Method

1) Ensure that the gas taps are in the 'OFF' position

2) Isolate the hob from the electricity supply

3) Remove all pan supports, burner caps, rings, crowns and control knobs.

4) With the aid of a 7mm box spanner the burner injectors can then be

unscrewed and replaced by the appropriate LPG injectors.

TO ADJUST THE GAS RATE

With the aid of a thin bladed screwdriver completely tighten down the

by pass adjustment screw, which is located down the centre of the gas

tap control shaft. Upon completion stick the replacement rating plate

on the under side of the hob.

IMPORTANT

The replacement/conversion of the gas hob should only be

undertaken by a competent person