AEG 3531 WK-m 지침서 - 페이지 8

{카테고리_이름} AEG 3531 WK-m에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 3531 WK-m 12 페이지. Electrolux cooktop user manual
AEG 3531 WK-m에 대해서도 마찬가지입니다: 지침서 (24 페이지), 지침서 (10 페이지)

페이지 인쇄

Burner cover/burner ring

Together with the burner ring the burner

cover forms a space where the final

mixture of gas and air takes place in

order to make the gas burn correctly.

Please note: It is consequently very

important that the burner cover/ring is

placed correctly on the burner. The

burner ring has been provided with

holes for the ignition electrode, and the

thermo sensor.

If the burner cover/ring are wrongly

placed the burner will operate

incorrectly, and the burners may be

damaged within at short space of time.

Ignition electrode (A)

The burner has been provided with an

ignition electrode. As long as the

operating knob is depressed, the

automatic ignition will ensure that a

spark is emitted between the ignition

electrode and the burner cover.

Thermo Sensor (B)

The hob unit features fully-secured gas

taps (thermo-fuse)

In case the flame goes out, the thermo

sensor automatically prevents gas

admission after a few seconds (max. 90

seconds).

Note: Gas admission is always allowed

while the operation button is pressed -

See start-up procedure

Burner ring

Burner cover

Correct

Wrong

Burner

Main nozzle

Burner ring

Burner cap

Ignition electrode (A)

T hermo Sensor (B)

Electrical Connection

This appliance is supplied with an

1800mm long flexible supply lead and

3 pin plug. The point of connection is

located at the rear and on the

underside of the appliance. Connect

the appliance to a readily accessible

switched general purpose outlet which

is adjacent to the appliance.

THIS APPLIANCE MUST BE

CONNECTED TO AN EARTHED

GENERAL PURPOSE OUTLET.