AEG 35610C 사용 설명서 - 페이지 20

{카테고리_이름} AEG 35610C에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 35610C 28 페이지. Gas hob
AEG 35610C에 대해서도 마찬가지입니다: 운영 및 설치 매뉴얼 (24 페이지), 작동 및 설치 지침 (24 페이지)

페이지 인쇄

Electrical connections

Any electrical work required to install this hob should be carried out by a qualified

electrician or competent person, in accordance with the current regulations.

THIS HOB MUST BE EARTHED.

The manufacturer declines any liability should these safety measures not be observed.

This hob is designed to be connected to a 230V - 50 Hz AC electrical supply.

Before switching on, make sure the electricity supply voltage is the same as that indicated

on the hob rating plate. The rating plate is located on the bottom of the hob. A copy is

attached on the back cover of this book.

The hob is supplied with a 3 core flexible supply cord incorporating a 3amp plug fitted. In

the event of having to change the fuse, a 3amp ASTA approved (BS 1362) fuse must be

used.

Should the plug need to be replaced for any reason, the wires in the mains lead are

coloured in accordance with the following code:

Green and Yellow

Blue

Brown

1) Connect the green and yellow (earth) wire

to the terminal in the plug which is marked

with the letter 'E' or the earth symbol

coloured green and yellow.

2) Connect the blue (neutral) wire to the terminal

in the plug which is marked with the letter 'N'

or coloured black.

3) Connect the brown (live) wire to the terminal

in the plug which is marked with the letter 'L' or coloured red.

Upon completion there must be no cut, or stray strands of wire present and the cord

clamp must be secure over the outer sheath.

In the event of having to change the fuse, a 3amp ASTA approved (BS 1362) fuse must

be used.

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard.

Ensure that the cut off plug is disposed of safely.

- Earth

- Neutral

- Live

FO 0390