A-I-R ATOS VR 운영 매뉴얼 - 페이지 11

{카테고리_이름} A-I-R ATOS VR에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. A-I-R ATOS VR 17 페이지.

6. Remove the tip and then slide the extension tube out. Place the ribs, tip, and extension at the front of

the glider so that they are not accidentally stepped on.

7. While standing behind the sail, pull the sail out along the D-cell and then fold over as shown so that the

outer spoiler lays white side to white side against the main spoiler. Tuck the tip lever and any fish cams

into the sail. Fold the sail end back onto itself. Reach under the D-cell and lift the spoilers up to the

bottom of the D-cell and the lift the flap so that it all makes an S fold against the bottom of the D-cell.

Place the tip bag over the end of the sail and D-cell and pull it on. Lift the flap and separate the Velcro at

a point where the tab on the tip bag just reaches. Attach the Velcro tab from the bag into the sail Velcro

thereby securing the tip bag as shown. Disassemble the other wing in the same manner.

8. Separate the stinger and lay the keel onto the ground.