Brother P2500 빠른 설정 매뉴얼 - 페이지 14

{카테고리_이름} Brother P2500에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother P2500 16 페이지. Brother mfc-p2500: quick setup
Brother P2500에 대해서도 마찬가지입니다: 사양 (3 페이지)

페이지 인쇄

Troubleshooting

Problem

Data is sent from the PC

but the printer does not

print and the Data LED is

blinking.

The printer prints

unexpectedly or it prints

garbage data or PC

scanning stops.

When you cannot scan

Recommendation

Check that the appropriate printer driver is selected.

Check that the printer cable is not too long.

- We recommend you use a parallel cable of less than 2

metres (6.6 feet) in length.

- Exchange it with another one.

Check that the printer cable is not damaged or broken.

- Exchange it with another one.

Check if you are using a parallel interface switching

device.

- Remove it and connect your PC directly to your

printer and try again.

Check that the printer is not connected to a parallel port

that is also connected to a mass storage device or scanner.

Remove all other devices and connect the port to the

printer only and try it again.

In the device options tab in the printer driver, turn off

printer status reporting.

Check that the appropriate printer driver is selected.

Check that the printer cable (or USB cable) is connected

securely.

Select P2500 from the application you are using.

When the P2500 does not appear in your application's

printer selection, install the scanner driver again.

xiii