Brother Work Smart MFC-J470dw 고급 사용자 설명서 - 페이지 35
{카테고리_이름} Brother Work Smart MFC-J470dw에 대한 고급 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother Work Smart MFC-J470dw 48 페이지. Printers
Brother Work Smart MFC-J470dw에 대해서도 마찬가지입니다: 에어 프린트 매뉴얼 (12 페이지), 사양 (2 페이지), 빠른 시작 매뉴얼 (35 페이지), 빠른 시작 매뉴얼 (35 페이지), 빠른 설정 매뉴얼 (37 페이지)
페이지 인쇄
l
Place the next page on the scanner
glass. Press OK to scan the page.
Repeat steps k and l until all the
pages have been scanned.
m
Press 2 to finish scanning.
The machine starts printing.
DO NOT touch printed pages until they are
ejected the second time. The machine will
print and eject the first side, and then pull the
paper back in to print the second side.
NOTE
If your document causes paper jams, try
using one of the special 2-sided copy
settings. Choose Advanced and then
press OK after step i, and then choose
2-sided1 or 2-sided2.
2-sided1 helps avoid paper jams when
copying by allowing more time for the ink
to dry. Choosing 2-sided2 allows more
time for the ink to dry while also using less
ink.
Setting your changes as a
new default
You can save the settings for the copy
options you use most often—such as
Quality, Enlarge/Reduce, Density,
Page Layout, 2-sided Copy
Remove Background—by setting them as
the defaults.
1
MFC models only
These settings will remain until you change
them again.
a
(MFC models)
Press
(COPY).
b
Press a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
c
d
e
Restoring all settings to the
factory default
You can restore the copy settings that you
have changed—such as Quality,
Enlarge/Reduce, Density,
Page Layout, 2-sided Copy
Remove Background—to the factory
default.
1
MFC models only
a
b
c
7
d
1
and
After changing the last setting, press
a or b to choose Set New Default.
Press OK.
Press 1 or + to choose Yes.
Press Stop/Exit.
(MFC models)
Press
(COPY).
Press a or b to choose
Factory Reset.
Press OK.
Press 1 or + to choose Yes.
Press Stop/Exit.
Making copies
7
1
and
7
31