Brother Work Smart MFC-J470dw 빠른 시작 매뉴얼 - 페이지 9
{카테고리_이름} Brother Work Smart MFC-J470dw에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother Work Smart MFC-J470dw 35 페이지. Printers
Brother Work Smart MFC-J470dw에 대해서도 마찬가지입니다: 에어 프린트 매뉴얼 (12 페이지), 고급 사용자 설명서 (48 페이지), 사양 (2 페이지), 빠른 시작 매뉴얼 (35 페이지), 빠른 설정 매뉴얼 (37 페이지)
페이지 인쇄
10
Transmission
Verification Report
Your Brother machine is equipped with a
Transmission Verification Report that can be used as
confirmation that you sent a fax. This report lists the
name or fax number of the receiving party, the date,
time, and duration of the transmission, the number of
pages transmitted, and whether or not the
transmission was successful.
Instructions on using this feature uuBasic User's
Guide: Transmission Verification Report
11
Set Tone or Pulse dialling
mode
Your machine comes set for a Tone dialling service. If
you have a Pulse dialling (rotary) service, you need to
change the dialling mode.
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Tone/Pulse.
Press OK.
d
Press a or b to choose Pulse (or Tone).
Press OK.
e
Press Stop/Exit.
12
Set the telephone line
type
If you are connecting the machine to a line that
features PBX or ISDN to send and receive faxes, it is
necessary to change the telephone line type
accordingly.
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Phone Line Set.
Press OK.
d
Press a or b to choose Normal, PBX or ISDN.
Press OK.
e
Press Stop/Exit.
NOTE
PBX and TRANSFER
The machine is initially set to Normal, which lets
the machine connect to a standard PSTN (Public
Switched Telephone Network) line. However,
many offices use a central telephone system or
Private Branch Exchange (PBX). Your machine
can be connected to most types of PBX. The
machine's recall feature supports timed break
recall only (TBR). TBR will work with most PBX
systems allowing you to gain access to an outside
line, or transfer calls to another extension. The
feature works when the Tel/R key is pressed.
9