Brother Work Smart MFC-J470dw 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Brother Work Smart MFC-J470dw에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother Work Smart MFC-J470dw 35 페이지. Printers
Brother Work Smart MFC-J470dw에 대해서도 마찬가지입니다: 에어 프린트 매뉴얼 (12 페이지), 고급 사용자 설명서 (48 페이지), 사양 (2 페이지), 빠른 시작 매뉴얼 (35 페이지), 빠른 설정 매뉴얼 (37 페이지)

페이지 인쇄
Brother Work Smart MFC-J470dw 빠른 시작 매뉴얼

Set your country

3
(Australia and New
Zealand only)
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
a
After connecting the power cord, the LCD
shows:
Press a or b to choose your country.
Press OK.
b
Press a or b to choose Yes or No.
Press OK.
c
After the LCD shows Accepted for a few
seconds, the machine will restart automatically.
4
Choose your language
(Hong Kong only)
a
Press the desired language.
Press OK.
b
Press a or b to choose Yes or No.
Press OK.
NOTE
If you set the wrong language, you can change it
later. See Choose your language (if needed)
(Hong Kong only) on page 8.
4
5

Install the ink cartridges

CAUTION
If ink gets in your eyes, wash it out with water at
once and call a doctor if you are concerned.
NOTE
Make sure you install the Starter Ink Cartridges
included with your machine first.
a
Make sure that the power is turned on.
The LCD will show No Ink Cartridge.
b
Open the ink cartridge cover a.
c
Remove the orange protective part a.
NOTE
Do not throw away the orange protective part.
You will need it if you transport the machine.
1
1