Brother Work Smart MFC-J470dw 빠른 시작 매뉴얼 - 페이지 8

{카테고리_이름} Brother Work Smart MFC-J470dw에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother Work Smart MFC-J470dw 35 페이지. Printers
Brother Work Smart MFC-J470dw에 대해서도 마찬가지입니다: 에어 프린트 매뉴얼 (12 페이지), 고급 사용자 설명서 (48 페이지), 사양 (2 페이지), 빠른 시작 매뉴얼 (35 페이지), 빠른 설정 매뉴얼 (37 페이지)

페이지 인쇄
Brother Work Smart MFC-J470dw 빠른 시작 매뉴얼
8

Set the date and time

The LCD displays the date and time. You can also
add the current date and time to each fax you send by
setting your Station ID (see step 12).
a
Enter the last two digits of the year on the dial
pad, and then press OK.
(e.g. Enter 1 3 for 2013.)
b
Enter the two digits for the month on the dial
pad, and then press OK.
c
Enter the two digits for the day on the dial pad,
and then press OK.
d
Press a or b to choose 12h Clock or 24h
Clock, and then press OK.
e
Enter the time on the dial pad, and then press
OK.
f
(12h Clock only)
Press a or b to choose AM or PM, and then
press OK.
NOTE
You can change date, time, or clock type (12h or
24h) at any time. For more information uuBasic
User's Guide: Setting the date and time
8
9
Wireless setup
(if needed)
When the Wi-Fi setup will start. message
appears on the LCD, read the message, and then
press OK to continue.
For wireless setup using a mobile device, go to a.
®
and Macintosh users, go to b.
For Windows
NOTE
If you want to configure any of the options in
steps 10-15, you can choose No in step a, and
then go to step 10.
You will be able to configure the wireless settings
later.
a
Press a or b to choose Yes.
Press OK.
Go to step 17 on page 18 to continue with the
wireless setup.
After finishing the wireless setup, return to
step 10 to finish the machine setup.
b
Press a or b to choose No.
Press OK.
Go to step 10 and continue with the machine
setup.
Wireless setup instructions for Windows
Macintosh users will be covered later, starting
on page 18.
NOTE
If a prompt message appears on the LCD, read it
and press OK to continue.
10
Choose your language
(if needed) (Hong Kong
only)
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Local Language.
Press OK.
d
Press a or b to choose your language.
Press OK.
e
Press Stop/Exit.
®
and