Brother Work Smart MFC-J470dw 빠른 설정 매뉴얼 - 페이지 8
{카테고리_이름} Brother Work Smart MFC-J470dw에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother Work Smart MFC-J470dw 37 페이지. Printers
Brother Work Smart MFC-J470dw에 대해서도 마찬가지입니다: 에어 프린트 매뉴얼 (12 페이지), 고급 사용자 설명서 (48 페이지), 사양 (2 페이지), 빠른 시작 매뉴얼 (35 페이지), 빠른 시작 매뉴얼 (35 페이지)
페이지 인쇄
5
Check the print quality
a
When the preparation process has finished, the
LCD shows Load Paper and Press Color
Start.
Press Color Start.
b
Check the quality of the four color blocks on the
sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press 1 (Yes) to
finish the quality check and go to the next step.
If lines are missing, press 2 (No) and follow the
steps on the LCD.
6
Set the date and time
The LCD displays the date and time. You can also
add the current date and time to each fax you send by
setting your Station ID (see step 10).
a
Enter the last two digits of the year on the dial
pad, and then press OK.
(e.g. Enter 1 3 for 2013.)
8
OK
Poor
b
Enter the two digits for the month on the dial
pad, and then press OK.
c
Enter the two digits for the day on the dial pad,
and then press OK.
d
Press a or b to choose 12h Clock or 24h
Clock, and then press OK.
e
Enter the time on the dial pad, and then press
OK.
f
(12h Clock only)
Press a or b to choose AM or PM, and then
press OK.
NOTE
You can change date, time, or clock type (12h or
24h) at any time. For more information, see
Setting the date and time in the Basic User's
Guide.