Brother Work Smart MFC-J475dw 빠른 시작 매뉴얼 - 페이지 19

{카테고리_이름} Brother Work Smart MFC-J475dw에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother Work Smart MFC-J475dw 35 페이지. Work smart series inkjet all-in-one
Brother Work Smart MFC-J475dw에 대해서도 마찬가지입니다: 에어 프린트 매뉴얼 (12 페이지), 사양 (2 페이지), 빠른 설정 매뉴얼 (37 페이지)

페이지 인쇄

For Wireless Network Users

Choose your wireless setup method

The following instructions will offer three methods for setting up your Brother machine on a wireless network. If

you began the wireless setup from step 9 on page 8, go to method b or c. For all other users, choose the method

you prefer for your environment.

Method a is the recommended way to connect (Windows

Setup using the CD-ROM (Windows

• It is recommended that you use a computer wirelessly connected to your network for this method.

• A USB cable might be needed in some cases.

Now go to

Manual setup from the control panel using the Setup Wizard (Windows

mobile devices)

If your wireless access point/router does not support WPS (Wi-Fi Protected Setup™) or AOSS™,

write down the wireless network settings of your wireless access point/router in the area below.

If you need assistance during setup and want to contact Brother Customer Service, make sure

you have your SSID (Network Name) and Network Key ready. We cannot assist you in locating

this information.

Item

SSID (Network Name)

Network Key*

* The Network Key may also be described as the Password, Security Key or Encryption Key.

NOTE

If you do not know this information (SSID and Network Key), you cannot continue the wireless

setup.

How can I find this information?

1) Check the documentation provided with your wireless access point/router.

2) The initial SSID could be the manufacturer's name or the model name.

3) If you do not know the security information, please consult the router manufacturer, your system

administrator, or your Internet provider.

Now go to

or Macintosh).

and Macintosh)

Record the current wireless network settings

page 21

, Macintosh and

page 22