Brother Work Smart MFC-J650dw 빠른 시작 매뉴얼 - 페이지 36

{카테고리_이름} Brother Work Smart MFC-J650dw에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother Work Smart MFC-J650dw 45 페이지. Work smart series inkjet all-in-one
Brother Work Smart MFC-J650dw에 대해서도 마찬가지입니다: 에어 프린트 매뉴얼 (12 페이지), 사양 (2 페이지), 기본 사용 설명서 (14 페이지), 자주 묻는 질문 및 문제 해결 (6 페이지)

페이지 인쇄

1. Connect the Usb Cable

Wireless Network

When the Firewall/AntiVirus detected screen

appears, choose Change the Firewall port

settings to enable network connection and

continue with the installation.

(Recommended), and then click Next.

If you are not using the Windows

the instructions provided with your firewall

software for information on how to add the

following network ports.



For network scanning, add UDP port 54925.



For network PC-Fax receiving, add UDP port

54926.

If you still have trouble with your network



connection, add UDP ports 137 and 161.

Choose your machine from the list, and then

click Next.

NOTE

• If your machine is not found over the network,

confirm your settings by following the

on-screen instructions. If you encounter this

failure, go to step 15-b on page 28 and setup

the wireless connection again.

• If you are using WEP and the Touchscreen

displays Connected but your machine is not

found on the network, make sure you entered

the WEP key correctly. The WEP key is

case-sensitive.

NOTE

• DO NOT cancel any of the screens during the

• If the Windows Security screen appears, click

Firewall, see

NOTE

The Brother Trial Photo Print screen appears

only once after restarting.

We recommend you try the Brother Trial Photo

Print selection to see the high quality output

available from your Brother machine.

Windows

The installation of the Brother drivers will

automatically start. The installation screens

appear one after another.

installation. It may take a few seconds for all

screens to appear.

the check box and click Install to complete the

installation correctly.

If the Environmental Advice for Imaging

Equipment screen appears, click Next.

When the On-Line Registration screen

appears, follow the on-screen instructions.

Click Next.

If you do not want to set your machine as the

default printer, clear the Set as Default Printer

check box, and then click Next.

When the Setup is Complete window

appears, confirm the settings, and then click

Next.

Finish and restart

Click Finish to restart your computer. After

restarting the computer, you must log on with

Administrator rights.