Brother Work Smart MFC-J650dw 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Brother Work Smart MFC-J650dw에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother Work Smart MFC-J650dw 45 페이지. Work smart series inkjet all-in-one
Brother Work Smart MFC-J650dw에 대해서도 마찬가지입니다: 에어 프린트 매뉴얼 (12 페이지), 사양 (2 페이지), 기본 사용 설명서 (14 페이지), 자주 묻는 질문 및 문제 해결 (6 페이지)

페이지 인쇄

1. Connect the Usb Cable

Install the ink cartridges

CAUTION

If ink gets in your eyes, wash it out with water at

once and call a doctor if you are concerned.

NOTE

Make sure you install the Introductory Ink

Cartridges included with your machine first.

Make sure that the power is turned on.

The Touchscreen will show No Ink

Cartridge.

NOTE

You can adjust the control panel angle to read the

Touchscreen more easily. Hold the edge of the

control panel to avoid accidentally pressing any of

the Touchscreen options.

Open the ink cartridge cover a.

Remove the orange protective part a.

NOTE

Do not throw away the orange protective part.

You will need it if you transport the machine.

Unpack the ink cartridge.

Turn the green release lever on the orange

protective packing a counterclockwise until it

clicks to release the vacuum seal. Then

remove the orange protective packing a as

shown.

IMPORTANT

• DO NOT shake the ink cartridges. If ink stains

your skin or clothing, wash with soap or

detergent at once.

• DO NOT touch the cartridge in the area

indicated b, as this can cause the machine not

to function with the cartridge.