AEG 6310 DK-m 지침서 - 페이지 14
{카테고리_이름} AEG 6310 DK-m에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 6310 DK-m 24 페이지. Ceramic glass hob
AEG 6310 DK-m에 대해서도 마찬가지입니다: 지침서 (24 페이지), 지침서 (21 페이지)
페이지 인쇄
It is not necessary to attach the
reinforcement beam to the work top
surface, as it is held in place by a
specially designed moulding, which is
incorporated in the hob units flanges.
The units externally measured
length
145 mm:
Cooker hood
290 mm:
Two-zone ceramic-top electric hob
Two-burner gas hob
Grill
Fryer
Wok
580 mm:
Four-zone ceramic-top electric hob
Four-burner gas hob
725 mm:
Four-zone ceramic-top electric hob
Installation of a single unit
When mounting a single unit, be it a
half-or full size unit, in a
worktopsurface which is thicker than
30 mm, it is necessary to make a
special notch in both sides of the cut-
out hole, as shown in the adjacent
drawing.
The purpose of these notches is to
create space for the electrical cables.
14