AEG 6530 DG-M 지침 및 설치 안내서 - 페이지 6

{카테고리_이름} AEG 6530 DG-M에 대한 지침 및 설치 안내서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 6530 DG-M 12 페이지. Electrolux user information gas hob
AEG 6530 DG-M에 대해서도 마찬가지입니다: 지침 및 설치 안내서 (25 페이지)

페이지 인쇄

Operations

Burner markings

Symbols at each control knob indicates

which burner is adjusted with the

control knob.

Front Burner

Back burner

Panel markings

Each control knob has a ring showing

the scale of markings.

Off.

Maximum flame

Minimum flame

Something not working

If the hob is not working correctly, please carry out the following checks before

contacting your local AEG Service Force Centre.

IMPORTANT: If you call out an engineer to a fault caused by incorrect use or

installation, a charge will be made even if the hob is under guarantee.

Sympton:

There is no spark when lighting the

gas

When the operating knob is released

the gas ring goes out again

The gas ring burns unevenly

If after all these checks, your hob still does not operate correctly, contact your

local AEG Service Force Centre.

In-guarantee customers should ensure that the above checks have been made as

the engineer will make a charge if the fault is not a mechanical or electrical

breakdown.

Please note that it will be necessary to provide proof of purchase for any in-

guarantee service calls.

Solution

Check hob is connected to the

electricity supply. Check the fuse and

replace if necessery.

The operating knob has not been

depressed long enough, or has not

been depressed sufficiently.

Ensure the cover has been replaced

correctly, e.g. after cleaning.