AEG 65300 K 사용자 지침 - 페이지 35

{카테고리_이름} AEG 65300 K에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 65300 K 40 페이지. Ceramic glass hob

The separation between the hob and the extractor hood must be at

least as large as that given in the extractor hood installation instruc-

tions.

• For protection against moisture, all cut surfaces are to be sealed with

a suitable sealant.

• On tiled work surfaces, the joints in the area where the hob sits must

be completely filled with grout.

• On natural, artificial stone, or ceramic tops, the snap action springs

must be bonded in place.

• Ensure that the seal is correctly seated in the frame and that it is

seated against the work surface without leaving any gaps. Additional

silicon sealant must not be applied, this will make removal more diffi-

cult in the event of the need for service.

• To remove the hob, it must be pressed out from below.

Installing and Connecting Up