AEG 65320 K 사용자 지침 - 페이지 18

{카테고리_이름} AEG 65320 K에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 65320 K 40 페이지. Ceramic glass hob
AEG 65320 K에 대해서도 마찬가지입니다: 사용자 지침 (40 페이지)

Operation of the Cooking Surface

Timer function

Setting/changing the cooking time

1. Select the desired cooking zone using the cooking zone selection but-

tons and set the desired heat setting.

2. Press the "Timer" button to activate the timer function for this cooking

zone.

3. Using the + or - buttons, set or change the amount of time required

until the cooking zone is to switch off automatically (e.g. 20 minutes).

The timer starts after a few seconds and indicates the amount of time

left.

The small "Timer Active" indicator is also illuminated for the respective

cooking zone, e.g. the upper left indicator corresponds to the rear left

cooking zone.

At the end of the cooking time set, the cooking zone switches off auto-

matically and an acoustic signal sounds.

4. Touch the TIMER button to switch off the signal and the indicator.

For quicker adjustment, leave your finger on the + or - button until

the desired value is reached.

If the - button is operated first, the time setting starts at 99 minutes.

If the + button is operated, the time setting starts at 1 minute.

Use of the timer as an interval timer (egg timer)

1. Press the "Timer" button to activate the timer function.

2. Using the + or - buttons, set the required cooking time

(e.g. 20 minutes).

The timer starts after a few seconds and indicates the amount of time

left.

When the time set is at an end, an acoustic signal sounds.

3. Touch the TIMER button to switch off the signal.

Select the desired cooking zone using the cooking zone buttons.

If the selected cooking zone is in timer mode, the remaining cooking

time appears in the "Cooking Time" display field.