Brother Airprint MFC-J460DW 제품 안전 매뉴얼 - 페이지 6

{카테고리_이름} Brother Airprint MFC-J460DW에 대한 제품 안전 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother Airprint MFC-J460DW 21 페이지.
Brother Airprint MFC-J460DW에 대해서도 마찬가지입니다: 사용자 설명서 (22 페이지), 빠른 설정 매뉴얼 (2 페이지)

페이지 인쇄

This product should be connected to an AC power source within the range indicated on the

rating label. DO NOT connect it to a DC power source or inverter. If you are not sure what kind

of power source you have, contact a qualified electrician.

Power Cord Safety:

• DO NOT pull on the middle of the AC power cord; pulling on the middle may cause the cord

to separate from the plug. Doing this might cause an electrical shock.

• DO NOT allow anything to rest on the power cord.

• DO NOT place this product where people can walk on the cord.

• DO NOT place this product in a position where the cord is stretched or strained, as it may

become worn or frayed.

• DO NOT use the product or handle the cord if the cord has become worn or frayed. If

unplugging your product, DO NOT touch the damaged/frayed part.

• Brother strongly recommends that you DO NOT use any type of extension cord.

• DO NOT use any cable, not included with this product, that does not meet the applicable

cable specifications described in the Quick Setup Guide.

It may cause a fire or injuries. Installation must be performed properly according to the Quick

Setup Guide.

DO NOT use this product during an thunderstorm.

Use caution when installing or modifying telephone lines. Never touch telephone wires or

terminals that are not insulated unless the telephone line has been unplugged at the wall jack.

Never install telephone wiring during a lightning storm. Never install a telephone wall jack in a

wet location.