AEG 66300 K-IN 설치 및 운영 지침 매뉴얼 - 페이지 23

{카테고리_이름} AEG 66300 K-IN에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 66300 K-IN 40 페이지. Ceramic glass hob
AEG 66300 K-IN에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (31 페이지)

페이지 인쇄

Uses, Tables and Tips

Pans

• You can recognise good pans by their bases. The base should be as

thick and flat as possible.

• Pay particular attention when buying new pans to the diameter of

the base. Manufacturers often give only the diameter of the upper

rim.

• Pots with aluminium or copper bases can cause metallic discolouring

on the ceramic glass surface, which is very difficult or impossible to

remove.

• Do not use cast iron pans or pans with a rough, burred or damaged

base. This can produce permanent scratching if the pan is slid across

the surface.

• When cold, pan bases are normal-

ly bowed slightly inwards (con-

cave). They should never be

bowed outwards (convex).

• If you wish to use special types of

pan (e.g. a pressure cooker, sim-

mering pan, wok, etc.), please ob-

serve the manufacturer's instructions.

Energy saving tips

• Always position pots and pans before switching on the cooking zone.

• Whenever possible always posi-

tion the lids firmly on pots and

pans to cover completely.

• Switch off the cooking zones be-

fore the end of the cooking time

to use the residual heat such as to

keep foods warm or for melting.

• The base of the pan should be the

same size as the cooking zone.