Brother Business Smart MFC-J4510dw 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} Brother Business Smart MFC-J4510dw에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother Business Smart MFC-J4510dw 29 페이지. Quick setup guide - spanish
Brother Business Smart MFC-J4510dw에 대해서도 마찬가지입니다: 매뉴얼 (36 페이지), 매뉴얼 (22 페이지), 제품 안전 매뉴얼 (17 페이지), 매뉴얼 (13 페이지), 매뉴얼 (22 페이지), 빠른 설정 매뉴얼 (47 페이지), 매뉴얼 (18 페이지), 빠른 설정 매뉴얼 (47 페이지), 브로셔 및 사양 (4 페이지), 제품 안전 매뉴얼 (20 페이지), 사양 (2 페이지), 빠른 설정 매뉴얼 (47 페이지), 제품 안전 매뉴얼 (25 페이지), (스페인어) 웹 연결 매뉴얼 가이드 (38 페이지), (스페인어) 매뉴얼 (24 페이지), (영어) 제품 안전 가이드 매뉴얼 (16 페이지), (스페인어) 매뉴얼 (11 페이지), (영어) 빠른 구성 가이드 (47 페이지)

Install the ink cartridges

CAUTION

If ink gets in your eyes, wash it out with water at

once and call a doctor if you are concerned.

NOTE

Make sure you install the Introductory Ink

Cartridges included with your machine first.

Make sure that the power is turned on.

NOTE

You can adjust the angle of the control panel by

lifting it. When lowering the control panel, make

sure you push the release button a that is

located behind the mark.

Open the ink cartridge cover a.

Remove the orange protective part.

IMPORTANT

• DO NOT shake the ink cartridges. If ink stains

• DO NOT touch the cartridge in the area

NOTE

The machine will prepare the ink tube system for

printing. This process will take approximately four

minutes. Do not turn off the machine.

Unpack the ink cartridge.

Turn the green release lever on the orange

protective packing a counterclockwise until it

clicks to release the vacuum seal. Then

remove the orange protective packing a as

shown.

your skin or clothing, wash with soap or

detergent at once.

indicated b, as this can cause the machine not

to function with the cartridge.

Take care to match the sticker colour with the

cartridge colour.

Install each ink cartridge in the direction of the

arrow on the label.

Gently push the back of the ink cartridge

marked "PUSH" until the cartridge lever lifts.

After all the ink cartridges are installed close

the ink cartridge cover.