Brother DCP 330C - Color Inkjet - All-in-One 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} Brother DCP 330C - Color Inkjet - All-in-One에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP 330C - Color Inkjet - All-in-One 19 페이지. Quick setup guide - french
Brother DCP 330C - Color Inkjet - All-in-One에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (33 페이지), 빠른 설정 매뉴얼 (32 페이지), (프랑스어) 빠른 설치 매뉴얼 (33 페이지)
페이지 인쇄
6
Print quality check
1
Set Paper and Press
2
Make sure paper is loaded in the paper tray.
Press Colour Start.
3
Check the quality of the four colour blocks on
the sheet.
(black/ yellow/ cyan/ magenta)
4
Is Quality OK?
Yes iPress
iPress
No
5
Do one of the following:
If all lines are clear and visible, press
(Yes) to finish the quality check.
If you can see missing short lines, press
(No) and go to step 6.
OK
6
7
8
Poor
Setting Up the Machine
The LCD asks you if the print quality is OK for
black and colour. Press
Black OK?
Yes iPress
iPress
No
Color OK?
Yes iPress
iPress
No
After pressing
(Yes) or
black and colour, the LCD shows:
Start Cleaning?
Yes iPress
iPress
No
Press
(Yes), the machine will then start
cleaning the colours.
After cleaning is finished, press Colour Start.
The machine starts printing the Print Quality
Check Sheet again and goes back to step 3.
(Yes) or
(No).
(No) for both
5