Brother DCP 7065DN 고급 사용자 설명서 - 페이지 20
{카테고리_이름} Brother DCP 7065DN에 대한 고급 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP 7065DN 24 페이지. Quick setup guide - english
Brother DCP 7065DN에 대해서도 마찬가지입니다: 고급 사용자 설명서 (33 페이지), 빠른 설정 매뉴얼 (20 페이지), 빠른 설정 매뉴얼 (20 페이지), 기본 사용 설명서 (5 페이지)
페이지 인쇄
Checking the remaining life of
the drum unit
You can see the machine's parts life on the
LCD.
a
Press Menu.
b
Press a or b to choose one of the
following:
3.Machine Info.
(DCP-7055/DCP-7057/DCP-7060D)
4.Machine Info.
(DCP-7055W/DCP-7057W/
DCP-7065DN)
5.Machine Info. (DCP-7070DW)
Press OK.
c
Press a or b to choose one of the
following:
4.Drum Life
(DCP-7055/DCP-7057/DCP-7060D)
5.Drum Life (DCP-7065DN)
6.Drum Life
(DCP-7055W/DCP-7057W/
DCP-7070DW)
Press OK.
d
Press Stop/Exit.
Note
The life check will be accurate only if you
have reset the part counter when you
installed a new part. It will not be accurate
if that part's life counter was reset during
the life of the used part.
16
Packing and shipping
the machine
A
Note
• If for any reason you must ship your
machine, carefully repack the machine in
the original packaging to avoid any
damage during transit. The machine
should be adequately insured with the
carrier.
• If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts, including the drum unit, the toner
cartridges, and printed materials to use
with your 'replacement' machine.
a
Turn off the machine's power switch.
Disconnect all the cables, and then
unplug the power cord from the AC
power outlet. Leave the machine turned
off for at least 10 minutes to cool down.
b
Open the front cover.
c
Remove the drum unit and toner
cartridge assembly. Leave the toner
cartridge installed in the drum unit.
A