AEG 68000KF-BN 설치 및 운영 지침 매뉴얼 - 페이지 26
{카테고리_이름} AEG 68000KF-BN에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 68000KF-BN 44 페이지. Electrolux ceramic glass induction hob induction cooktop model 68000kf-bn installation and operating instructions
페이지 인쇄
3
To set the timer more quickly, leave your finger on the + or - sensor
field until the required time is reached.
If the - sensor field is operated first, the time setting will begin at
99 minutes; if the + sensor field is operated first, the time setting will
begin at 1 minute.
Displaying the remaining cooking time
If you select a cooking zone which is in timer mode, the cooking time
still remaining appears in the timer display window.
Using the timer to measure short periods of time
("Minute Minder").
1
Important! None of the cooking zones should be set with the Timer!
1. Touch the "On/Off" sensor field for around two seconds.
The digital display _ flashes.
2. Touch the TIMER W sensor field to activate the Timer function.
3. Using the + or - sensor fields, set the desired length of time (for ex-
ample, 20 minutes).
The Timer begins to run after a few seconds, and indicates the time re-
maining.
When the set time has elapsed, an audible signal is sounded.
4. Touch the TIMER W sensor field, to switch off the signal.
Ending the timer function prematurely
There are two ways of switching off the timer early:
Switching off the cooking zone and timer simultaneously
1. Select the desired cooking zone using the cooking zone buttons.
2. Touch the + and - buttons simultaneously: The cooking zone and
timer will switch off.
Switching off the timer - leaving the cooking zone active
1. Select the desired cooking zone using the cooking zone buttons.
2. Touch the "Timer" button again.
3. Touch the + and - buttons simultaneously:
– Only the timer will switch off.
– The cooking zone will stay on.
26