AEG 68000KF-BN 설치 및 운영 지침 매뉴얼 - 페이지 38

{카테고리_이름} AEG 68000KF-BN에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 68000KF-BN 44 페이지. Electrolux ceramic glass induction hob induction cooktop model 68000kf-bn installation and operating instructions

페이지 인쇄

Electrical Connection

Before connecting, check that the nominal voltage of the appliance,

that is the voltage stated on the rating plate, corresponds to the avail-

able supply voltage. The rating plate is located on the lower casing of

the hob.

The heating element voltage is AC230V~. The appliance also works

perfectly on older networks with AC220V~.

The hob is to be connected to the mains using a device that allows the

appliance to be disconnected from the mains at all poles with a contact

opening width of at least 3 mm, eg. automatic line protecting cut-

out,earth leakage tripsorfuse.

A type H05VV-F cable or one with a higher grade must be used as the

mains connecting cable.

The connection must be carried out as shown in the diagram. The con-

necting links should be fitted according to the appropriate connection

diagram. The earth lead is connected to terminal E. The earth lead

must be longer than leads carrying electric current.

The cable connections must be made in accordance with regula-

tions and the terminal screws tightened securely.

Finally, the connecting cable is to be secured with the mains cable cleat

and the covering closed by pressing firmly (lock into place).

Before switching on for the first time, any protective foil or stickers

must be removed from the glass ceramic surface.

Once connected to the mains supply check that all cooking zones are

ready for use by briefly switching each on in turn at the maximum set-

ting.