Brother DCP-7040 빠른 설정 매뉴얼 - 페이지 8

{카테고리_이름} Brother DCP-7040에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-7040 18 페이지. Quick setup guide - spanish
Brother DCP-7040에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (20 페이지), 빠른 설정 매뉴얼 (19 페이지), 빠른 설정 매뉴얼 (32 페이지), (영어) 빠른 구성 가이드 (20 페이지)

페이지 인쇄
Brother DCP-7040 빠른 설정 매뉴얼
STEP 1
Setting Up the Machine
3

Install the power cord

1
Make sure that the machine's power switch is
off. Connect the AC power cord to the machine.
2
Plug the AC power cord into an AC outlet. Turn
the power switch on.
4
Set your country (DCP-
7040 and DCP-7045N)
1
Check that the power is turned on by plugging
in the power cord.
Press OK.
Set Country
Press OK Key
2
Press
Others
Select ab or OK
3
Press OK when the LCD shows your country.
4
The LCD prompts you to make sure of the
country again.
Others?
a Yes b No
5
Do one of the following:
If the LCD shows the correct country,
press
Press
country again.
6
After the LCD shows Accepted for two
seconds, it shows Please Wait.
6
or
to select your country.
to go to step 6.
to go back to step 2 to select the
5

Selecting your language

1
After turning the power switch on, the LCD
shows:
Select Language
Press OK Key
Press OK.
2
Press
or
to select
your language and press OK.
Select ab or OK
English
3
If your language is selected, press
English?
a Yes b No
Note
If you have set the wrong language, you can
change the language from the control panel menu
of the machine. (For details, see "Changing LCD
language" in Appendix of the User's Guide.)
6

Setting the LCD contrast

You can change the contrast to help the LCD look
lighter or darker.
1
Press Menu and
1.General Setup. Press OK.
2
Press
or
to select 5.LCD Contrast.
Press OK.
3
Press
to increase the contrast.
—OR—
Press
to decrease the contrast.
Press OK.
4
Press Stop/Exit.
(Yes).
or
to select