Brother DCP-7045N 빠른 설정 매뉴얼 - 페이지 15

{카테고리_이름} Brother DCP-7045N에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-7045N 18 페이지.
Brother DCP-7045N에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (32 페이지), 빠른 설정 매뉴얼 (32 페이지)

페이지 인쇄

Installing the Driver & Software

For Wired Network Interface Users (DCP-7045N only)

For Mac OS X 10.2.4 or greater

Important

Make sure that you have finished the

instructions from step 1 Setting Up the

Machine on pages 4 through 6.

Plug the AC power cord into an AC outlet. Turn

the power switch on.

Connect the network interface cable to the

machine, and then connect it to your network.

Turn on your Macintosh.

Put the supplied CD-ROM for Macintosh into

your CD-ROM drive.

Double-click the Start Here OSX icon to install.

Follow the on-screen instructions.

The Brother software will search for the Brother

device. During this time the following screen

will appear.

Note

• If the machine is configured for your network,

choose the machine from the list, and then click

OK. This window will not appear if there is only one

machine connected on the network, it will be

chosen automatically. Go to step 7.

• If this screen appears click OK.

Enter a name for your Macintosh in Display Name

up to 15 characters long and click OK.

Go to step 7.

• If you want to use the machine's Scan key to scan

over the network you must check the Register

your computer with the "Scan To" function on

the machine box.

• The name you enter will appear on the machine's

LCD when you press the Scan key and choose a

scan option. (For more information, see Network

Scanning in the Software User's Guide on the CD-

ROM.)

Macintosh