Brother DCP-7057 빠른 설정 매뉴얼 - 페이지 14

{카테고리_이름} Brother DCP-7057에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-7057 20 페이지. Printers
Brother DCP-7057에 대해서도 마찬가지입니다: 고급 사용자 설명서 (24 페이지), 빠른 설정 매뉴얼 (15 페이지)

페이지 인쇄
Brother DCP-7057 빠른 설정 매뉴얼
Wired Network
For Wired Network Interface Users (DCP-7065DN only)
(Mac OS X 10.4.11 - 10.6.x)
8
Before you install
a
Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
IMPORTANT
For Mac OS X 10.4.10 users, upgrade to
Mac OS X 10.4.11 - 10.6.x. (For the latest
drivers and information on the Mac OS X you
are using, visit http://solutions.brother.com/.)
b
Remove the protective cap from the LAN
connector marked with a
c
Connect the network interface cable to the LAN
connector and then connect it to a free port on
your hub.
d
Make sure your machine's power switch is on.
14
a
b
symbol.
It may take a few minutes for installation to
complete.
c
If your machine is not found over the network,
confirm your network settings.
Macintosh
9
Install MFL-Pro Suite
Put the installation CD-ROM into your
CD-ROM drive.
Double-click the Start Here OSX icon. Follow
the on-screen instructions.
Note
Follow the on-screen instructions until this
screen appears. Choose your machine from
the list, and then click OK.
Note