Brother DCP-7060D 고급 사용자 설명서 - 페이지 20

{카테고리_이름} Brother DCP-7060D에 대한 고급 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-7060D 33 페이지. Printers
Brother DCP-7060D에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (20 페이지), 빠른 설정 매뉴얼 (20 페이지), 고급 사용자 설명서 (24 페이지), 빠른 설정 매뉴얼 (15 페이지), 기본 사용 설명서 (5 페이지)

Note

In addition to cleaning the scanner glass

and glass strip with a soft lint-free cloth

moistened with water, run your finger tip

over the glass to see if you can feel

anything on it. If you feel dirt or debris,

clean the glass again concentrating on

that area. You may need to repeat the

cleaning process three or four times. To

test, make a copy after each cleaning.

Plug the machine's power cord back into

the AC power outlet first, connect all

cables, and then plug in the telephone

line cord. Turn on the machine's power

switch.

Cleaning the corona wire

If you have print quality problems, clean the

corona wire as follows:

Open the front cover and leave the

machine turned on for 10 minutes to

cool down.

WARNING

HOT SURFACE

After you have just used the machine, some

internal parts of the machine will be

extremely hot. When you open the front or

back cover (back output tray) of the

machine, DO NOT touch the shaded parts

shown in the illustration. If you do this, you

may get burned.

Slowly take out the drum unit and toner

cartridge assembly.

CAUTION

We recommend that you place the drum

unit and toner cartridge assembly on a

clean, flat surface with a sheet of

disposable paper or cloth underneath it in

case you accidentally spill or scatter toner.